Mellerware Blender 62200 User Manual

Sylvio  
Jug Blender  
M o d e l :  
6 2 2 0 0  
4 5 0 W  
PLEASE READ ALL INSTRUCTIONS BEFORE USE  
MW_ 62200_IM .indd  
1
2012/07/11 12:52:11 PM  
that they do not play with the appliance.  
Switch off the appliance and disconnect  
it from the wall socket before changing  
accessories.  
handle so it is at the 5 o’clock position and  
then turn it clock wise until it clicks into  
place. The jug handle should be in the 3  
o’clock position.  
To eliminate a choking hazard for young  
children, remove and safely discard the  
protective cover fitted to the plug and the  
appliance.  
Handle the blender and its attachments  
with care – remember the blades are razor-  
sharp and should be kept out of the reach  
of children.  
Insert the measuring cup into the lid and  
turn clockwise to lock.  
Place the lid onto the jug, position it so  
that it is at the 5 o’clock position and then  
turn it clock wise until it clicks into position.  
The handle and the lid should be in the 3  
o’clock position.  
Ensure that the blender is completely  
assembled before operating. The blender  
will not operate unless it is properly  
assembled.  
Do not attempt to operate the blender by  
any method other than those described in  
this instruction manual.  
Instructions for use:  
Place the ingredients you wish to blend  
into the jug.  
Place the lid on the jug. Place the  
measuring cup into the hole in the lid and  
turn clockwise to lock.  
Place your hand on the lid and apply firm  
pressure before selecting the desired  
speed. The appliance is fitted with a safety  
switch and requires sufficient downward  
pressure for it to switch on.  
Turn the speed control dial to the desired  
setting. Use the “P” (pulse function) for  
complete control while blending. This  
function uses maximum power as long as  
you hold it in position.  
Always operate the blender with the  
blender jug lid in position.  
Keep fingers, hands, knives and other  
utensils away from the moving blades.  
Do not place hands or fingers into the  
blender jug unless the motor and blades  
have come to a complete stop. Ensure the  
speed selection dial is in the ‘0’ position  
and the appliance is switched off at the  
wall socket and it is unplugged before  
removing the lid from the blender.  
Ensure the motor and the blades have  
completely stopped before disassembling.  
Ensure the speed selection dial is in the  
‘0’ position and that the appliance is  
switched off at the wall socket and that it is  
unplugged.  
WARNING: NEVER LEAVE THE APPLIANCE  
ALONE WHILE IN OPERATION.  
After using the blender, always move the  
switch into the ‘0’ setting, switch it off at  
the wall socket and then remove the plug.  
To remove the jug simply rotate it anti-  
clockwise and lift it off the motor base.  
Before first use:  
Useful tips:  
Remove all the packaging and promotional To achieve the best results when pureeing  
material. All parts of the blender are to be  
thoroughly cleaned before being used.  
Always exercise extreme caution when  
cleaning inside the blender, the blades are  
very sharp.  
solid ingredients, place small portions into  
the jug one by one instead of placing a  
large quantity inside all at once.  
If you are processing solid ingredients, cut  
them into small pieces (2-3cm) first.  
When mixing solid ingredients start off first  
with a small amount of liquid. Gradually  
add the solid ingredients and then more  
liquid through the opening in the lid.  
Always place your hand on top of the  
blender while it is in use.  
Assembling the jug:  
Ensure that the blender is not plugged  
into the wall socket.  
Make sure that the blender is switched off  
(switch is in the ‘0’ position).  
Place the jug onto the base, position the  
MW_ 62200_IM .indd  
3
2012/07/11 12:52:11 PM  
Cleaning:  
Service:  
Motor base:  
Before returning your product for service  
or repair – check the following:  
Your household wall socket is working  
properly.  
Never immerse the motor base in water.  
Only wipe it with a damp cloth.  
Blender jug:  
Empty the jug and fill it with water. Place  
the jug on the motor base and turn the  
switch several times to the ‘P’ setting.  
Empty the jug and rinse until clean.  
Always exercise extreme caution when  
cleaning the inside the jug as the blades  
are sharp.  
The mains supply circuit is not overloaded.  
The instructions for use have been  
followed carefully.  
All safety switches are engaged when the  
blender is switched on.  
If service becomes necessary within the  
guarantee period the appliance should be  
returned to your nearest approved service  
centre.  
WARNING: THE JUG OR ANY PART OF  
THE JUG ASSEMBLY SHOULD NOT BE  
CLEANED USING A DISH WASHER. USE  
OF A DISH WASHER MAY RESULT IN  
DAMAGE AND WILL VOID THE WARRANTY.  
MW_ 62200_IM .indd  
4
2012/07/11 12:52:11 PM  
MW_ 62200_IM .indd  
5
2012/07/11 12:52:11 PM  
MW_ 62200_IM .indd  
6
2012/07/11 12:52:11 PM  

Rockford Fosgate FFC69 User Manual
Polk Audio GNX104 4 User Manual
Pioneer MVH P8200 User Manual
Philips AQ6495 User Manual
Oster Blender User Manual
Oster Blender OSTER VERSA PERFORMANCE BLENDER User Manual
Nokia HS 11W User Manual
Marshall electronic Marshall Electronics Camera Lens V ZPL12 User Manual
KitchenAid 4KFP740CR0 User Manual
KitchenAid 4KFP720BU0 User Manual