Mellerware Blender 62000 User Manual

Apollo Stainless Steel Blender  
Model:  
62000/  
6 2 0 0 7  
complies with  
INTERNATIONAL  
IEC60335  
SAFETY SPECIFICATIONS  
5 0 0 W  
PLEASE READ ALL INSTRUCTIONS BEFORE USE  
2 y e a r g u a r a n t e e  
remove it.  
Before first use  
Useful tips:  
All parts of the blender are to be thoroughly  
cleaned before being used for the first time.  
To achieve the best results when pureeing  
solid ingredients, place small portions into  
the glass jar one by one instead of placing a  
large quantity all at once.  
If you are processing solid ingredients, cut  
them into small pieces (2-3cm) first.  
When mixing solid ingredients start off first  
with a small amount of liquid. Gradually add  
more and more liquid through the opening  
in the lid.  
Always place your hand on top of the  
blender when you are operating the device.  
For stirring solid or very thick liquid  
ingredients we recommend that you use  
the blender in impulse mode to prevent the  
blades from becoming stuck.  
Assembling the Jar:  
1.Put the rubber sealing ring (5) on the inner edge  
of the blade unit (6).  
2.Put the blade unit with sealing ring into the cup  
base (7).  
3.Inset the ring (4) on the bottom of jar first, then  
Insert the assembled cup base onto the bottom  
of the jar (3) and turn clockwise to secure tightly  
in place.  
4.Mount the Measure Cup (1) onto the Lid (2).  
5.Secure the Lid onto Jar and press into place.  
Inserting the Jar:  
1.Make sure that the blender is switched off  
(Switch in the ‘0’ setting).  
2.Place the jar assembly (9) on to the motor base  
(8) and press down until securely engaged.  
Motor Base:  
Never immerse the motor base in water. Wipe it  
only with a damp cloth.  
Instructions for Use  
Simple cleaning/ rinsing out the assembled glass  
jar:  
Empty the glass jar and fill it with water. Place the  
glass jar on the motor base and turn the switch  
several times into the ‘P’ setting. Empty the glass  
jar and rinse until clean.  
1.Place the foodstuff you wish to process into the  
jar.  
2.Place the lid on the jar and close securely. Place  
the measuring cap into the hole in the lid and  
turn clockwise to lock.  
3.Place your hand on the lid and apply firm  
pressure before switching the unit ON. The  
appliance is fitted with a safety switch and  
requires sufficient downward pressure to  
operate.  
WARNING: THE JAR OR ANY PART OF THE  
JAR ASSEMBLY IS NOT BE CLEANED USING A  
DISH WASHER. USE OF A DISH WASHER MAY  
RESULT AND DAMAGE AND THE WARRANTY  
WILL BE VOID.  
4.Switch on the motor base to desired setting:  
Speed setting  
1
2
Use  
SAVE THESE INTRUCTIONS  
THIS PRODUCT IS FOR HOUSEHOLD USE  
ONLY!  
for light usage with liquids  
for more solid consistency –  
for mixing liquids and solid  
foodstuffs  
Warranty  
0
stop operation  
P
for ice crushing & short,  
powerful impulse movements  
We guarantee that this product has been  
thoroughly inspected and tested before  
dispatched and is free from mechanical and  
electrical defects. Should defects due to faulty  
material or workmanship develop within one year  
from date of purchase, under normal domestic  
use, the appliance will be repaired free of charge.  
Note: If this product is used commercially the  
guarantee is limited to 90 days.  
(The switch does not permanently engage in the  
‘PULSE’ setting. You have to hold the switch in  
the ‘PULSE’ setting or turn it repeatedly into the  
‘P’ setting)  
WARNING: NEVER LEAVE THE APPLIANCE  
ALONE WHILE IN OPERATION.  
Kindly retain your purchase slip for this must be  
presented if making a claim under the terms of  
the guarantee. If such proof is not available the  
product shall be deemed to be older than one  
year and a charge for service and \ or spares will  
After using the blender, always move the switch  
into the ‘0’ setting and pull out the mains plug.  
To remove the glass jar simply lift it off the motor  
base. You do not have to rotate the glass jar to  
be applicable. Should your appliance require  
attention or appear not to be operating properly,  
please take it to the retailer from whom it was  
purchased, together with all parts and your  
purchase slip.  
This guarantee does not cover wear and tear  
or damaged cause by over-loading negligence,  
accidental or improper use. Any changes will  
invalidate the guarantee, as would any attempted  
repair.  
SERVICE  
Before returning your product for service or repair  
– check the following:  
Your household mains supply socket is working  
properly.  
• The mains supply circuit is not overloaded.  
• The instructions for use have been followed  
carefully.  
If service becomes necessary within the  
guarantee period the appliance should be  
returned to the retail outlet where purchased or  
carefully packed and marked “fragile-handle with  
care“ and sent carriage paid to the address below.  
(Postage is not refundable) Service outside the  
guarantee period is still available but this will be  
chargeable.  
27 Nourse  
Avenue Epping  
2
Cape Town  
P.O. Box 975 Eppindust 7475 South Africa  
Tel: +27 21 534 8114 Fax: +27 21 534 8086  
Service Centre Share Call: 086 111 5006  
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a  

Pyramid Technologies PB449X User Manual
Pioneer RS P90 User Manual
Pioneer AppRadio SPH DA01 User Manual
Pentax Camera Flash AF140C User Manual
Panasonic HDC SD9P User Manual
Olympus TCON 14 User Manual
Nortel Networks 207344 B User Manual
Newcon Optik NIGHT VISION RIFLE SCOPE DN 140 User Manual
Kenwood KVT 725DVD B User Manual
Kenwood KDC W6537U User Manual