E X E C U T I V E
S A V O Y
M E A T
M I N C E R
complies with
INTERNATIONAL
Model:
2 6 6 0 2
IEC60335
5 5 0 W
SAFETY SPECIFICATIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 y e a r g u a r a n t e e
26602 IM.indd
1
24/08/2011 09:05:22
Safety advice and warnings
not properly fitted.
- Read these instructions carefully before
assembling or switching on the appliance and
keep them for future reference. Failure to follow
and observe these instructions could lead to an
accident.
- Clean all the parts of the product that will be in
contact with food, as indicated in the cleaning
section, before use.
- Do not use the appliance if the on/off switch
does not work.
- Do not apply any additional pressure on the
appliance while it is in use.
- Do not force the appliance to process more
food or process food quicker than it is
capable of processing.
- Remove the plug from the wall socket when the
appliance is not in use and before undertaking
any cleaning task.
Working environment:
- The appliance must be used on a flat, stable
surface.
- Remove the plug from the wall socket before
replacing any accessory.
- Ensure that the air vents (intake and outlet) do
not become totally or partially covered by drapery,
clothing etc. as this is a fire hazard.
- This appliance is for household use only, not
professional or industrial use.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
Electrical safety:
- Do not use the appliance if the cable or plug is
damaged.
- This appliance is intended for adult use. Ensure
that this product is not used by the disabled,
children or people not familiar with its operation.
- This appliance should be stored out of reach of
children and/or the disabled.
- Ensure that the voltage indicated on the rating
label corresponds with the voltage supply of the
wall socket before plugging the appliance in.
- The appliance’s plug must fit into the wall socket
properly. Do not alter the plug. Do not use plug
adaptors.
- Do not use or store the appliance outdoors.
- Always ensure that the power cord is in a good
working condition. Damaged or tangled cords
increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Switch off the appliance and disconnect from
electricity supply before changing accessories or
approaching parts that move during use.
- Do not operate this appliance with wet hands.
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
- Do not use the appliance for more than 8
minutes at any one time.
- Exercise caution during the assembly and
disassembly of the cutting blades, as they are
sharp and could cause serious injury.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the
manufacturer’s liability null and void.
Instructions for use
- Prepare the appliance with the accessory
required according to the food to be prepared.
- Cut all foods into pieces (sinewless, boneless
and fatless meat is recommended, approximate
size: 20 mm x 20 mm x 60 mm) so that the food
fits easily into the machine head opening.
- Insert the plug into the wall socket.
appliance by a person responsible for their safety. - Turn the appliance on using the on/off switch.
- Place food portions on the tray. Use the food
Personal safety:
- Do not switch the appliance on if you are not
going to use it immediately.
pusher to feed the portions down the chute of
the mincing head.
- Do not touch any of the appliance’s moving
parts while it is operating.
Accessories:
Cutting plates (I)
- Exercise caution after switching off the
appliance as the blades will continue to rotate
for a brief period.
- Cutting plates allow for meat to be minced
coarser or finer depending on the size of the
holes in the plate.
- Press & hold the lock button while inserting
the mincing head (fig. 1). Then turn the mincing
head anti-clockwise until the chute is vertical.
Release the lock button to secure the mincing
head in position (fig. 2).
Use and care:
- Fully unroll the appliance’s power cord before
each use.
- Do not use the appliance if its accessories are
26602 IM.indd
3
24/08/2011 09:05:22
Fig. 1
Fig. 4
Fig. 7
Fig. 2
Fig. 5
Fig. 8
Fig. 3
Fig. 6
Fig. 9
- Insert the endless screw through the outlet mouth
of the mincing head (fig. 3).
- Position the cutting blades on the endless screw
with the cutting edge pointing towards the endless
screw (fig. 4).
- Insert the required cutting plate onto the endless
screw, fitting the bulges on the cutting plate in the
notches of the outlet mouth edge of the mincing
head (fig. 5).
- Screw the lock rim tightly onto the outlet mouth of
the mincing head turning clock-wise to secure the
endless screw, cutting blades and the cutting plate
(fig. 6).
Sausage accessory (L)
- Press & hold the lock button while inserting
the mincing head (fig. 1). Then turn the
mincing head anti-clockwise until the chute is
vertical. Release the lock button to secure the
mincing head in position (fig. 2).
- Insert the endless screw through the outlet
mouth of the mincing head (fig. 3).
- Position the cutting blade on the endless screw
with the cutting edge pointing towards the
endless screw (fig. 4).
- Insert the cutting plate with the largest holes
onto the endless screw, fitting the bulges on
the cutting plate in the notches of the outlet mouth
- Position the tray at the top of the mincing head.
26602 IM.indd
4
24/08/2011 09:05:23
edge of the mincing head (fig. 5).
- Insert the sausage accessory through the locking
rim (fig. 7).
- Screw the lock rim tightly onto the outlet mouth of
the mincing head, turning clockwise to secure the
endless screw, cutting blades and the cutting plate
(fig. 6).
Anomalies and repair
- Take the appliance to an authorised technical
support service center if any problems arise.
Do not try to dismantle or repair without
assistance, as this may be dangerous.
- If the plug has been damaged, it must be
replaced and you should proceed as you
would in the case of damage.
- Position the tray at the top of the mincing head.
Kibbeh accessory (M)
- Press & hold the lock button while inserting
the mincing head (fig. 1). Then turn the mincing
head anti-clockwise until the chute is vertical.
Release the lock button to secure the mincing head
in position (fig. 2).
- Insert the endless screw through the outlet
mouth of the mincing head (fig. 3).
- Insert the Kibbeh accessory base onto the
endless screw and position the other Kibbeh
accessory on top. Fit the bulges of the Kibbeh
base in the notches of the filling mouth (fig. 8).
- Screw on the lock rim, turning clock-wise to
secure the Kibbeh accessory onto the endless
screw (fig. 9).
- Position the tray at the top of the mincing head.
Reverse Function:
- If food gets stuck, switch off the appliance.
Press the I/ II knob and set to “II” position and
ON/0/R switch to “R” position.
- The endless screw will rotate in the opposite
direction and unclog the mincing head.
- If this doesn’t work, switch off the unit and clean it.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
- Remove the plug from the wall socket.
- Clean the appliance.
Cleaning
- Clean the equipment with a damp cloth and a few
drops of washing up liquid, and then dry.
- Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance, power cord or
plug in water or any other liquid or place under
running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- The following components may be cleaned in a
dishwasher: tray, mincing head, lock rim, endless
screw and cutting plates.
This appliance complies with
Directive 2006/95/EC on Low Voltage
and Directive 2004/108/EC on
Electromagnetic Compatibility.
26602 IM.indd
5
24/08/2011 09:05:23
27 Nourse
Avenue Epping
2
Cape Town
P.O. Box 975 Eppindust 7475 South Africa
Tel: +27 21 534 8114 Fax: +27 21 534 8086
Service Centre Share Call: 086 111 5006
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a
26602 IM.indd
6
24/08/2011 09:05:23
|