CAPRI
induction
cooker
Feather to
induction c
Black crys
cooking pl
y
Adjustable temperature
control
Model:
27240
2000W
46004_IM.indd
1
1/21/2014 4:14:59 PM
will increase the risk of electric shock.
•If any parts of the appliance casing breaks, im-
mediately disconnect the appliance from the wall
socket to prevent the possibility of an electric
shock.
•Do not use the appliance if it has fallen or if there
are visible signs of damage.
•Do not use the appliance with wet hands or when
barefoot.
•Do not tug or pull the power cable. Never lift, carry
or unplug the appliance by pulling on the power
cable.
‘STIR FRY’ Function
•Press the ‘ON / OFF’ button and the ‘Stir Fry’ preset
will be selected automatically which starts with
maximum power. You are able to adjust power
between 100W-2000W by pressing the ‘UP’ or
‘DOWN’ button until the desired heat is reached.
‘HIGH’ (High heat ) Function
•Press the ‘FUNCTION’ button until the pilot light
next to the ‘High’ icon is illuminated. The func-
tion will automatically increase the heat to 240°C.
Press the ‘UP’ or ‘DOWN’ button in order to adjust
temperature between 80~240°C.
•Do not wrap the power cable around the appliance.
•Ensure that the power cable does not become
knotted or tangled.
•Do not allow the power cable to come into contact
with the appliance’s hot surfaces.
•Check the state of the power cable before use. A
damaged or tangled power cable will increase the
risk of electric shock and is a fire hazard.
•Do not touch the plug with wet hands.
‘SAUTÉ’ Function
•Press the ‘FUNCTION’ button until the pilot light
next
to the “SAUTÉ” icon is illuminated, the cooker will
instantly increase the cooking power by 100~200W
for 3 minutes and then automatically change back
to
Cookware Selection:
•Proper Cookware:
‘High’ Function.
Cookware made from a ferrous (or magnetic) metal
or cookware with a base coated with a magnetic/
induction material, such as enamel, cast iron or
stainless steel is required for the induction cooker
to work.
‘MED’ (Medium heat) Function
•Press the ‘FUNCTION’ button until the pilot light
next to the “MED” icon is illuminated. The “MED”
function works intelligently and can automatically
control the temperature. Whilst consuming minimal
power it will maintain a medium to low temperature.
When using this function, the appliance will auto-
matically switchoff after two hours.
Improper Cookware:
Cookware made of ceramic, glass, aluminum and
bronze, cookware with uneven bottom, cookware
with an aluminum encapsulated base will not work
with an induction cooker.
‘PORRIDGE’ Function
Operating Instruction:
•Unroll the power cable.
•Place the cooking pot in the centre of the black
crystal plate.
•Add cooking ingredients.
•Plug the cooker into the wall socket ensuring the
voltage of the wall socket corresponds to the volt-
age on the rating label at the base of the product.
The induction cooker will make a “Beep” sound
and the digital display will indicate ‘----’.
•Press the ‘ON/OFF’ button to commence cook-
ing. Instructions on different cooking modes and
programming are discussed later in this instruction
manual.
•Press the ‘FUNCTION’ button until the pilot light
next to the “PORRIDGE” icon is illuminated. The
“PORRIDGE” function works intelligently and will
automatically control the power. This function
will switch off the appliance when the porridge is
cooked optimally.
‘SOUP’ Function
•Press the ‘FUNCTION’ button until the light next to
the “Soup” icon is illuminated. The “SOUP” func-
tion
works intelligently and will automatically control the
power. This function will switch off the appliance
when the soup is cooked optimally.
•After cooking, press the ‘ON/OFF’ button and the
induction cooker will automatically turn to “cooling”
mode. The appliance will power down after 30
seconds.
‘BRAISING’ Function
•Press the ‘FUNCTION’ button until the pilot light
next to the “BRAISING” icon is illuminated. The
“Braising” function works for a default time of 10
minutes. This function can be used to braise your
food. Press the ‘TIMER’ button to adjust the cook-
ing time between 10~120 minutes. It will automati-
cally turn off when the time is up.
•Unplug the power cable from the wall socket.
Use:
•Press the ‘ON / OFF’ button, the ‘Stir Fry’ preset
function will automatically be selected, this is the
maximum power mode. When you are finished
cooking, press the ‘ON / OFF’ button again to
switch the cooker off. The fan will continue to oper-
ate for another 30 seconds in order to cool the unit.
‘LOW’ (Low Heat) Function
•Press the ‘FUNCTION’ button until the “LOW” func-
tion is illuminated. ‘LOW’ function works intelligent-
46004_IM.indd
3
1/21/2014 4:14:59 PM
ly and will automatically control the temperature
in order to cook at a light simmer (below boiling
point). The function will automatically switch the
appliance off after one hour.
cooker is switched on. First, press the ‘ON / OFF’
button to switch off the power before unplugging
the power cable from the wall socket, this will
extend the life of the induction cooker.
‘TIMER’ Function
•‘STIR FRY’, ‘HIGH” and ‘BRAISING’ functions have-
default cooking times.
•The range of the cooking time for The ‘STIR FRY’
and ‘HIGH’ cooking time range is between 1~120
minutes.‘BRAISING’ cooking time can be set be-
tween 10~120 minutes. The other functions do not
havedefault cooking times.
Cleaning
•Allow the appliance to cool down completely be-
fore undertaking any cleaning task.
•Clean the appliance regularly.
•Use a soft, damp cloth to clean the appliance, do
not use gasoline or benzene.
•Do not use any abrasive chemicals or materials to
clean the appliance.
•Press the ‘TIMER’ button to increase the cooking
time by 1 minute, press ‘TIMER’ continuously in
order to increase the cooking time in increments of
10 minutes.
•Wipe the body of the appliance with the soft damp
cloth taking care not to use too much water. Do not
allow water to drip from the cloth onto any part of
the appliance.
•Clean the air inlet and outlet periodically with soft
brush or vacuum cleaner as dust may get caught in
the air inlet or outlet, this will extend the life of the
induction cooker.
Time Delay Function
•Press ‘FUNCTION’ button and then press the ‘TIM-
ER’ button, the delay time will be increased by 30
minutes each time the ‘TIMER’ button is pressed.
•The range of the time delay is from 30 minutes up
to 24 hours. The “Time Delay” function will start
cooking when the set time has finished counting
down. Press ‘OFF’ button to cancel the function.
•‘SOUP’, ‘PORRIDGE’, ‘LOW’ and ‘MED’ functions
can be used with the ‘Time Delay’ function, while
‘STIR FRY’, ‘HIGH’ and ‘SAUTÉ’ do not have this
function.
•Never place the induction cooker under running
water or immerse it in water or any other liquid.
Notice: Switch the power off when the appliance
is not in use. Only clean the appliance once the
cooking surface has cooled down completely. Do
not use the appliance if the surface is dirty, when
the appliance re-heats the dirt will become more
difficulty to remove.
•Exercise extreme caution when using this function
and take care not to leave the appliance unattend-
ed during the countdown and especially not when
the countdown has finished as cooking appliances
should never be left unattended while switched on.
•Do not set the “Time delay” and then leave the
house. Ensure that when the countdown has fin-
ished that you are in the room and that your pot is
prepared and on top of the appliance.
FAULTS DIAGNOSIS AND SAFETY PROTECTION
•E0 Power light on, no cooking pot is on the cooking
surface or the pot is made from unsuitable materi-
als for the induction cooker.
•E1 First light on indicates that power voltage is
below 100v~ (for some models, it is 150v).
•E2 Indicates that power voltage is above 270v
•E3 Second light on indicates temperature detector
of the plate has short circuited or overheated.
•E4 Third light on indicates that the circuit of the
temperature detector is open.
“CONSUMPTION” Button
•When the appliance is on press the “CONSUMP-
TION” button to check the amount of electricity that
the appliance has used since it has been switched
on.
•E5 Fourth light on indicates that the temperature
detector of radiator has short circuited or over-
heated.
•The screen will display the consumption for a min-
ute and then return to what it displayed before the
button was pressed.
•E6 Fifth light on indicates that the circuit of the
temperature detector for the radiator is open.
•Note: E1, E2 will automatically return to normal
operation once the voltage has been corrected.
Note: The power consumption displayed is for refer-
ence purposes only.
Safety cut off: When the induction cooker is in use
continuously for two hours without any buttons
being pressed, the appliance will turn off automati-
cally (Unless the time delay function is being used).
Induction Cooker Maintenance and Cleaning
•Before undertaking any cleaning task, unplug the
power cable from the wall socket.
•Do not unplug the power cable while the induction
46004_IM.indd
4
1/21/2014 4:14:59 PM
46004_IM.indd
5
1/21/2014 4:15:00 PM
|