Mellerware Coffeemaker 29500A User Manual

12 Cup capacity  
Keep warm  
function  
Anti-drip valve  
y
29500A  
800W  
_IM.indd  
1
2012/11/23 03:16:21 PM  
 
1. Make sure the appliance has cooled  
down before cleaning or storing.  
2. The appliance may release smoke and  
or smell when you use it for the first few  
times because of the oil on some parts.  
This will disappear after a few uses.  
4. Return the filter holder to original posi-  
tion, make sure it is fixed properly in  
place.  
5. Place the jug on the warming plate.  
6. Switch the appliance on by pressing  
the On/Off switch, the indicator lamp  
will light up and the appliance will start  
working.  
Technical data  
Ratings: 220-240V~ 50Hz, 800W  
Nominal capacity of water tank: 1.2L  
7. The appliance will brew until the water  
tank is emptied thereafter it will auto-  
matically go into keep-warm mode. The  
warming plate will keep the brewed cof-  
fee warm at:  
Know your coffee maker  
1. Above 72°C in half an hour.  
2. Above 68°C in an hour.  
Cleaning  
1. Do not forget to remove the plug from  
the socket and make sure the appliance  
has cooled down before cleaning.  
2. Never immerse the cord, plug, or appli-  
ance itself in water.  
3. Once the appliance has cooled down  
completely wipe the outside with a soft,  
moist cloth. Never use metal polish.  
4. Clean the permanent filter (if applicable)  
and other detachable parts in warm  
soapy water. Rinse with fresh water and  
dry before reassembling.  
5. Clean the inside of the jug with a soft  
brush in warm soapy water. Rinse with  
fresh water and dry before next use.  
6. To ensure the appliance works at an  
optimal level it is recommended that the  
appliance be cleaned once every three  
months.  
1. Water tank cover  
2. Water tank  
3. Top lid  
4. Filter holder  
5. Anti-drip valve  
6. Glass jug  
7. Warming plate  
8. On/Off switch with indicator lamp  
7. Store the appliance in a dry, cool place.  
Note: Never use a dishwasher to clean  
the jug.  
Descaling  
Operation  
The appliance needs to be descaled  
1. Lift the water tank cover and fill with fresh regularly otherwise the coffee taste may be  
cold water to required level.  
2. Close the water tank cover.  
3. Swing the filter holder out. Put an ad-  
equate quantity of ground coffee into the  
permanent filter (if applicable) or paper  
filter inside the filter holder.  
affected. The deposited scale inside the  
machine may also cause permanent and  
irreparable damage.  
Signs that descaling is necessary:  
Increase in noise during boiling,  
Brewing time is longer than normal,  
_IM.indd  
3
2012/11/23 03:16:21 PM  
 
Appliance switches off before the water  
tank is empty.  
with the prepared solution.  
3. Operate the appliance until the water  
tank is empty as if you had brewed a jug  
of coffee, but without a paper filter and  
ground coffee in the filter holder.  
4. Repeat steps 1 to 3 for another descaling  
cycle.  
Descaling frequency depends on the water  
hardness and the brewing frequency. Gener-  
ally, descaling should be done periodically  
as follows:  
With soft water, at least once every 3  
months.  
With hard water, at least once every  
month.  
Note: Never refill the water tank with the  
used descaling solution because it is no  
longer active.  
5. Operate two more brewing cycles with  
fresh, cold water to remove all descaler  
solution residues.  
If in doubt about the hardness of your water,  
contact your local municipality.  
6. Important:  
It is recommended to use only liquid descal-  
ers suitable for coffee makers. Read the  
descaling instructions carefully before use.  
1. Mix adequate descaler with cold water in  
a measuring jug.  
A. Never interrupt the descaling process.  
B. Malfunctions caused by scale depos-  
ited inside the appliance are not cov-  
ered by the guarantee if the descaling  
process is not carried out properly.  
Note: Never use a powder descaler.  
2. Fill the water tank up to the Max level  
_IM.indd  
4
2012/11/23 03:16:21 PM  
 
Troubleshooting  
If you have a problem, you may find the solution in the table below. In case these solutions  
can not solve your problem yet, please contact with the nearest authorized service agent for  
examination, repair or adjustment.  
Problem  
Solution  
The appliance does not work.  
Make sure the voltage indicated on the appliance corresponds to the local mains voltage.  
Make sure the appliance has been plugged in & switched on.  
Water leaks out of the appliance. Check if the water tank is filled beyond the MAX level.  
The appliance produces a lot of Make sure the water tank is not filled with hot water.  
noise and steam during brewing. The appliance needs to be descaled (see heading ‘Descaling’).  
Coffee grounds enter into the  
jug.  
Check if the filter holder has overflowed because there is too much ground coffee in the filter,  
or the jug has not been placed correctly under the filter holder, or you removed the jug after  
30 seconds during brewing.  
Check if the filter is torn or you use the wrong size of paper filter.  
Brewing coffee takes  
longer than usual.  
The appliance needs to be descaled (see heading Descaling’).  
The appliance needs to be descaled (see heading Descaling’).  
The coffee maker  
switches off before the  
water tank is empty.  
The coffee is not strong enough. Check if used ground coffee is not enough. It should be one heaped measuring spoon of  
ground coffee for each cup.  
Check if you use ground coffee with mild flavour.  
The coffee is too strong.  
Check if used too much ground coffee. It should be one heaped measuring spoon of ground  
coffee for each cup.  
Check if you have used ground coffee with strong flavour.  
The coffee does not taste  
good.  
Check if you leave the glass jug with coffee on the warm plate too long, especially if it only  
contains a small amount of coffee.  
The coffee is not hot  
enough.  
Check if the brewed coffee is too little. The coffee will warm longer if you brew more.  
Make sure you place the glass jug properly on the warm plate.  
The jug is difficult to place in  
the appliance or remove from  
the appliance.  
Make sure the lid of the jug & filter basket are in right position.  
Tilt the jug in an angle to place or remove it. Be careful not to spill the hot coffee for avoid-  
ing scald.  
There is less coffee in the  
jug than expected.  
Check if you have placed the jug properly on the warm plate, in a manner that prevents the  
coffee from flowing out of the coffee filter.  
The appliance needs to be descaled (see heading Descaling’).  
_IM.indd  
5
2012/11/23 03:16:21 PM  
 
_IM.indd  
6
2012/11/23 03:16:22 PM  
 

La Crosse Technology Portable Speaker WS 2814U IT User Manual
Lucent Technologies IP Phone 555 661 150 User Manual
Manitowoc Ice Ice Maker K00055 User Manual
MartinLogan Speaker CLX User Manual
Matias Carrying Case Laptop Armor Stretch Bag User Manual
Maytag Clothes Dryer MDG30MNV User Manual
Maytag Vacuum Cleaner F6212901 User Manual
Mellerware Styling Iron 2 0 3 2 57 0 W User Manual
Micro Innovations Webcam 4310100 User Manual
MidiLand Portable Speaker 4060 User Manual