Liebert Network Card Web Card User Manual

Liebert Intellislot® Web Card  
Quick Start Guide  
INSTALL  
• Locate the Intellislot option bay on your Liebert equipment—You  
might need to remove a plastic cover.  
• Insert the IntelliSlot Web Card into the Intellislot bay.  
• Secure the card with the supplied screws.  
• Connect an Ethernet cable.  
DHCP: The card ships with DHCP service enabled. The MAC  
address is printed on a sticker affixed to the top of the card.  
OR  
Static IP: To assign a static IP address, use the  
Service Terminal to configure the card. Proceed  
to Steps 2 & 3.  
CONNECT THE CABLE  
• Locate the blue serial configuration cable (null  
modem) that shipped with the card.  
• Connect the configuration cable to the DB-9 port  
on the card and to a COM port on your PC.  
CONFIGURE THE CARD  
• Use terminal emulation software,  
such as HyperTerminal , to open a  
direct connection to the card.  
Baud Rate:  
Data Bits:  
Parity:  
9600  
8
None  
1
Stop Bits:  
Flow Control: None  
• Press Enter for the Main Menu,  
above right.  
• Select option 2 and follow the  
instructions to enter an IP  
ADDRESS, NETMASK and GATE-  
WAY.  
• Press Esc to return to the Main  
Menu.  
• Enter X and press Enter to exit  
HyperTerminal and save your changes.  
NOTE  
When installing the card in a Liebert NX, configure the  
communication port of NX to 2400 baud. Refer to the NX user  
manual for instructions.  
 

Lenoxx Electronics Home Theater System HT 391 User Manual
LG Electronics Cell Phone TV Phone User Manual
Liebert Surge Protector Little Glass House User Manual
Life Fitness Treadmill M051 00K58 A034 User Manual
Link electronic Stereo Amplifier LEI 555 User Manual
LST Smoke Alarm AI 58000 500 User Manual
Lumens Technology Webcam VC G50 User Manual
Magnavox CRT Television 27MT5405 17 User Manual
Magnavox Projection Television 51MP6100Ds User Manual
Memorex Cordless Telephone MPH2410 User Manual