LG Electronics Home Theater System LH T7634TF User Manual

LH-T7634TF_NA1ULLA_ENG  
Flat Speaker  
Home Theater System  
OWNER’S MANUAL  
MODEL: LH-T755  
(Main Unit:LH-T755  
Speakers: LHS-76TFS, LHS-76TFC,  
LHS-76TFW)  
R
USB  
Before connecting, operating or repairing this product,  
please read this instruction booklet carefully and  
completely.  
Call us and we will  
guide you through  
your first recording,  
for free.  
1-800-243-0000  
FOR THE WARRANTY TERMS & CONDITIONS,  
PLEASE REFER TO BACK COVER OF THIS MANUAL.  
 
FCC WARNING: This equipment may generate or use radio  
frequency energy. Changes or modifications to this  
equipment may cause harmful interference unless the  
modifications are expressly approved in the instruction  
manual. The user could lose the authority to operate this  
equipment if an unauthorized change or modification is  
made.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK  
OF ELECTRIC SHOCK  
DO NOT REMOVE COVER (OR BACK)  
NO USER-SERVICEABLE PARTS INSIDE  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
REGULATORY INFORMATION: FCC Part 15  
This epuipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference when the  
product is operated in a residential installation. This product  
generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this  
product does cause harmful interference to radio or  
television reception, which can be determined by turning the  
product off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
This lightning flash with arrowhead symbol within  
an equilateral triangle is intended to alert the user  
to the presence of uninsulated dangerous voltage  
within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric  
shock to persons.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and maintenance  
(servicing) instructions in the literature  
accompanying the product.  
Reorient or relocate the receiving antenna.  
Increase the separation between the product and  
receiver.  
Connect the product into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
CAUTION: Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions.  
SERIAL NUMBER: The serial number is located on the back  
of this unit. This number is unique to this unit and not  
available to others. You should record requested information  
here and retain this guide as a permanent record of your  
purchase.  
Slots and openings in the cabinet are provided for ventilation  
and to ensure reliable operation of the product and to protect  
it from over heating.  
The openings should be never be blocked by placing the  
product on a bed, sofa, rug or other similar surface. This  
product should not be placed in a built-in installation such as  
a bookcase or rack unless proper ventilation is provided or  
the manufacturer's instruction have been adhered to.  
Model No. ___________________________________  
Serial No. ___________________________________  
CAUTION concerning the Power Cord  
Most appliances recommend they be placed upon  
a dedicated circuit;  
That is, a single outlet circuit which powers only that  
appliance and has no additional outlets or branch  
circuits. Check the specification page of this owner's  
manual to be certain.  
CLASS  
1
LASER PRODUCT  
KLASSE 1 LASER PRODUKT  
LUOKAN 1 LASER LAITE  
KLASS  
1
LASER APPARAT  
CLASSE 1 PRODUIT LASER  
Do not overload wall outlets. Overloaded wall outlets,  
loose or damaged wall outlets, extension cords,  
frayed power cords, or damaged or cracked wire  
insulation are dangerous. Any of these conditions  
could result in electric shock or fire. Periodically  
examine the cord of your appliance, and if its  
appearance indicates damage or deterioration, unplug  
it, discontinue use of the appliance, and have the cord  
replaced with an exact replacement part by an  
authorized servicer.  
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCKS DEFEATED.  
CAUTION:  
This product employs a Laser System.  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain it for future reference.  
Should the unit require maintenance, contact an authorized  
service center.  
Protect the power cord from physical or mechanical  
abuse, such as being twisted, kinked, pinched, closed  
in a door, or walked upon. Pay particular attention to  
plugs, wall outlets, and the point where the cord exits  
the appliance.  
To disconnect power from the mains, pull out the  
mains cord plug. When installing the product, ensure  
that the plug is easily accessible.  
Use of controls, adjustments or the performance of  
procedures other than those specified herein may result in  
hazardous radiation exposure.  
To prevent direct exposure to laser beam, do not try to open  
the enclosure. Visible laser radiation when open. DO NOT  
STARE INTO BEAM.  
CAUTION: The apparatus should not be exposed to water  
(dripping or splashing) and no objects filled with liquids, such  
as vases, should be placed on the apparatus.  
3
 
Introduction  
Maintenance and Service  
Maintenance and Service . . . . . . . . . . . . . . . . .4  
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Front Panel/Rear Panel . . . . . . . . . . . . . . . . . . .6  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .7  
Refer to the information in this chapter before  
contacting a service technician.  
HANDLING THE UNIT  
Installation and Setup  
TV Connections . . . . . . . . . . . . . . . . . . . . . . . . .8  
Optional Equipment Connections . . . . . . . . . . .9  
Antenna Connections . . . . . . . . . . . . . . . . . . . .9  
Assembling and Connecting to the Speakers 10  
How to connect the Speakers . . . . . . . . . . . . .10  
To change the stand . . . . . . . . . . . . . . . . . . . .10  
To mount the speaker on the wall . . . . . . . . . .11  
Speaker System Connection . . . . . . . . . . . . . .11  
HDMI Connection . . . . . . . . . . . . . . . . . . . . . . .12  
Displaying Disc Information on-screen . . . . . .13  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .13  
General Operation . . . . . . . . . . . . . . . . . . . . . .13  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .14  
Lock (Parental Control) . . . . . . . . . . . . . . . . .15  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide spray  
near the unit.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Operation  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
General features . . . . . . . . . . . . . . . . . . . . . . .16  
Additional features . . . . . . . . . . . . . . . . . . . . .17  
Playing an Audio CD or MP3/WMA file . . . . . .18  
Programmed Playback . . . . . . . . . . . . . . . . . .18  
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .19  
Playing a DivX Movie file . . . . . . . . . . . . . . . . .20  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .21  
Presetting the Radio Stations . . . . . . . . . . . . .22  
Listening to the Radio . . . . . . . . . . . . . . . . . . .22  
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .23  
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Using Headphone Jack . . . . . . . . . . . . . . . . . .23  
Selecting input source . . . . . . . . . . . . . . . . . . .23  
XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .23  
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Controlling Your TV with  
Maintaining the Unit  
The DVD/CD Receiver is a high-tech, precision  
device. If the optical pick-up lens and disc drive parts  
are dirty or worn, the picture quality could be  
diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
the Supplied Remote . . . . . . . . . . . . . . . . . . . .24  
REFERENCE  
Language Codes . . . . . . . . . . . . . . . . . . . . . . .25  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Troubleshooting . . . . . . . . . . . . . . . . . . . . .26-27  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .28  
4
 
Introduction  
Types of Playable Discs  
Before use  
DVD  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future  
reference.  
(8 cm / 12 cm disc)  
Audio CD  
(8 cm / 12 cm disc)  
This manual provides information on the operation  
and maintenance of your DVD/CD Receiver. Should  
the unit require service, contact an authorized service  
location.  
In addition, this unit can play a DVD-RW, DVD+RW,  
and CD-R or CD-RW that contains audio titles, MP3,  
WMA, JPEG or DivX files.  
Notes:  
About the  
Symbol Display  
Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD-RW,  
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,  
DVD+RW) discs cannot be played on the unit.  
Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
” may appear on your TV display during  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal). It may result in malfunctions.  
Symbol Used in this Manual  
Note:  
Regional Code  
Indicates special notes and operating features.  
This unit has a regional code printed on the rear of the  
unit. This unit can play only DVD discs labelled same  
as the rear of the unit or “ALL”.  
Tip:  
Indicates tips and hints for making the task easier.  
Notes on Regional Codes  
A section whose title has one of the following symbols  
is applicable only to the disc represented by the  
symbol.  
Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your DVD player’s regional  
code or the disc cannot play.  
DVD-V  
DVD and finalized DVD R/RW  
If you try to play a DVD with a different regional  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
DVD-A  
DVD Audio discs  
CD  
Audio CDs  
MP3  
MP3 Discs  
WMA  
WMA Discs  
JPEG  
DivX  
JPEG Discs  
DivX Discs  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic”, and the double-D symbol are  
trademarks of Dolby Laboratories. Confidential Unpublished  
works. Copyright 1992-1997 Dolby Laboratories. All rights  
reserved.  
Manufactured under license from Digital Theater Systems,  
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-  
wide patents issued and pending. "DTS" and "DTS Digital  
Surround” are registered trademarks of Digital Theater  
Systems, Inc. Copyright 1996, 2003 Digital Theater  
Systems, Inc. All Rights Reserved."  
5
 
Front Panel/Rear Panel  
PHONES connector  
STANDBY/ON  
FUNC./PLAY  
DISC Tray  
OPEN/CLOSE button  
Press and hold down this button about 3  
seconds, then press repeatedly to select  
other function.  
STANDBY indicator  
Lights red when the  
receiver is in Standby  
mode (off).  
VOLUME controller  
DISPLAY Window  
Remote sensor  
USB Port  
Connect to a USB port of  
memory device  
MONO/ST./  
P./STEP  
TUNING(-/+)/  
SKIP(.bb/BB>)  
buttons  
(USB memory etc.)  
STOP  
Power Cord  
SPEAKER connectors  
FM Antenna connector  
L
AUDIO  
R
HDMI OUT  
AM Loop Antenna connectors  
S-VIDEO OUT connector  
HDMI OUT  
HDMI output  
Cooling fan  
MONITOR OUT connector  
providing a high  
quality  
interface for digital  
audio and video.  
COMPONENT VIDEO OUT terminals  
Connect to a TV with Y Pb Pr inputs.  
wireless TX  
(DC 7V OUT)  
Connector  
AV1 AUDIO Input (L/R)/VIDEO IN Connectors  
AV2 AUDIO Input (L/R)/VIDEO IN Connectors  
Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause  
permanent damage to the unit.  
6
 
OPEN/CLOSE (Z)  
Opens and closes the disc tray.  
AUX  
Remote Control  
POWER  
DVD  
Selects input source.  
USB  
Select the output source (CD/DVD).  
BAND  
Select the System’s tuner (FM and AM  
bands)  
0-9 numerical buttons  
Select a service, programme number  
directly or select numbered options in a  
menu.  
To enjoy the multimedia files.  
MARKER  
Marks a point during playback.  
SEARCH  
Displays MARKER SEARCH menu.  
SUBTITLE  
Selects a subtitle language (DVD).  
RETURN  
Removes the setup menu.  
XTS pro  
DISPLAY  
To enjoy more natural and realistic  
Accesses On-Screen display.  
sound.  
To enjoy great sound effect.  
VIRTUAL  
b/B/v/V (left/right/up/down)  
Selects an option in the menu.  
ENTER  
Selects the VIRTUAL sound  
Acknowledges the menu selection.  
AUDIO ꢀ  
Selects an audio language (DVD) or  
an audio channel (CD).  
SOUND ꢀ  
Selects the sound mode.  
SETUP  
Accesses or removes setup menu .  
MENU  
PRESET(-/+) (v/V)  
Select programme of Radio.  
TUN.(-/+) (b/B)  
To tune in the desired radio station.  
TITLE  
Displays the disc’s Title menu, if available.  
VOLUME (+/-)  
To adjust speaker volume.  
PROG.  
Accesses or removes Program menu.  
Accesses the menu on a DVD disc.  
SCAN/SLOW(bb/BB) ꢀ  
Search backward or forward.  
Reverse/Forward slow playback.  
REVERSE/FORWARD SKIP  
(./>) ꢀ  
MEMO.  
Enter a radio station’s frequency into the  
tuner.  
CLEAR  
Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
STOP (x) ꢀ  
MUTE  
ZOOM  
SLEEP  
Set the System to turn off automatical-  
ly at a specified time.  
PAUSE/STEP (X) ꢀ  
PLAY (B) ꢀ  
REPEAT ꢀ  
Repeat chapter, track, title, all  
REPEAT A-B ꢀ  
RESOLUTION  
Repeats sequence.  
Changes the resolution depending  
on your TV.  
HDMI  
Switches the HDMI mode to HDMI  
(active) and OFF (inactive).  
DIMMER  
Press to change brightness of the  
display window on the front panel during  
in power-on status.  
TV  
To control the TV. (See page 24)  
Remote Control Operation Range  
Remote Control battery installation  
Point the Remote Control at the remote sensor and press the  
Remove the battery cover on the rear of  
the Remote Control, and insert two R03  
buttons.  
Distance: About 23 ft (7 m) from the front of the remote  
(size AAA) batteries with  
aligned correctly.  
and  
sensor  
Angle: About 30° in each direction in front of the remote  
sensor  
Caution  
Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).  
7
 
Installation and Setup  
TV Connections  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
S-Video connection  
Connect the S-VIDEO OUT jack on the DVD/CD  
Receiver to the S-VIDEO IN jack on the TV using the  
S-Video cable (S).  
Tips:  
Depending on your TV and other equipment you  
wish to connect, there are various ways you could  
connect the DVD/CD Receiver. Use one of the  
connections described below.  
Video connection  
Connect the MONITOR OUT jack from the DVD/CD  
Receiver to the VIDEO IN jack on the TV using the  
video cable supplied (V).  
Please refer to the manuals of your TV, VCR,  
Stereo System or other devices as necessary to  
make the best connections.  
®
Component Video (Color Stream ) connection  
Connect the COMPONENT VIDEO OUT jacks from  
the DVD/CD Receiver to the corresponding in jacks  
on the TV using an Y Pb Pr cable (C).  
Caution:  
Make sure the DVD/CD Receiver is connected  
directly to the TV. Select the correct AV input on  
your TV.  
Note:  
Do not connect your DVD/CD Receiver to TV via  
your VCR. The DVD image could be distorted by  
the copy protection system.  
HDMI mode must be set to OFF for VIDEO OUT and  
S-VIDEO OUT and Component video connections.  
Rear of TV  
VIDEO  
INPUT  
S-VIDEO  
INPUT  
COMPONENT VIDEO  
/
PROGRESSIVE SCAN INPUT  
Y
Pb  
Pr  
L
V
S
C
L
AUDIO  
R
Rear of DVD/CD Receiver  
8
 
Optional Equipment  
Connections  
Antenna Connections  
Connect the supplied FM/AM antenna for listening to  
the radio.  
1. Connect a VCR to the AV IN connectors.  
Connect the AM Loop antenna to the AM antenna  
2. Connect the USB port of USB Memory (or MP3  
player, etc.) to the USB port on the front of the unit.  
connector.  
Connect the FM Wire antenna to the FM antenna  
connector.  
Rear of VCR  
Front of DVD/CD Receiver  
IN  
OUT  
Notes:  
VID
To prevent noise pickup, keep the AM Loop antenna away  
from the DVD/CD Receiver and other components.  
Be sure to fully extend the FM wire antenna.  
After connecting the FM Wire antenna, keep it as  
horizontal as possible.  
AUDIO
AUDIO
To AUDIO OUT (L/R)/  
VIDEO OUT  
USB Memory, MP3 Player (or  
Memory Card Reader, etc.)  
To AV IN AUDIO (L/R)/  
VIDEO  
L
AUDIO  
R
AM Loop antenna (supplied)  
FM Wire antenna (supplied)  
To Remove the USB Device from the unit  
1. Choose a different function mode or press the  
STOP (x) twice in a row.  
L
AUDIO  
R
2. Remove the USB from the unit.  
Notes:  
Don’t extract the USB device while operating.  
Music files (MP3/WMA), image files (JPEG) and  
DivX files can be played.  
This unit can not format memory cards.  
This unit can not use a USB HUB.  
Recommended Memory Cards.  
Compact Flash Card (CFC), Micro Drive (MD), Smart  
Media Card (SMC), Memory Stick (MS), Secure Digital  
Card (SD), Multi Media Card (MMC), Memory Stick Pro  
(MS-Pro)  
- Compatable with : FAT16, FAT32  
- Only use the memory cards recommended.  
Devices which require additional program  
installation when you have connected the unit to a  
computer are not supported.  
In case of a USB HDD, make sure to connect an  
auxiliary power cord to the USB HDD for proper  
operation. Up to four primary partitions of a drive are  
supported. If there is an extention partition, it will not  
be supported.  
If the USB device has two or more drives, a drive  
folder is displayed on the screen. If you want to  
move to the previous menu after you select a  
folder, press RETURN.  
Digital cameras and mobile phones are not  
supported.  
9
 
Assembling and Connecting to  
the Speakers  
The speakers are detached from the speaker stands.  
Connect the speaker cables and assemble the front  
and rear speakers from speaker stands as illustrated.  
To change the stand  
1. Open the holder cover of the speaker.  
2. Remove the 2 screws in the speaker hole.  
3. Remove the speaker from the stand.  
4. Remove the 4 screws from the round board.  
5. Remove the stand from the round board.  
How to connect the Speakers  
1. Connect the speaker cables to the appropriate  
terminal on the bottom of the round board.  
6. Disconnect the connector cable between the stand  
and round board.  
7. Connect the connector cable between the desired  
stand and round board.  
2. Set the speaker on the stand.  
3. Fix the speaker and the stand by inserting the 2  
screws (4 mm) in the speaker hole.  
8. Set the desired stand on the round board.  
9. Fix the desired stand and the round board with the  
4 screws.  
4. Close the holder cover of the speaker.  
10. Follow steps 2-4 of “Assembling the Speakers”.  
10  
 
To mount the speaker on the  
wall  
1. For Front or Rear Speaker : Remove the speaker  
from the stand (Follow steps 1-3 of “To change the  
stand”).  
Speaker System Connections  
Connect the SYSTEM to the SYSTEM CONNECTOR  
rear of the Active Subwoofer Speaker, using the  
supplied System cable.  
Connect the speakers using the supplied speaker  
cables.  
For Center Speaker : Remove the 4 screws from  
stand.  
To obtain the best possible surround sound, adjust the  
speaker parameters (volume, distance, etc.).  
2. For Front or Rear Speakers :Disconnect the  
speaker cable from the terminal on the bottom of  
the round board.  
Notes:  
3. For Front or Rear Speaker : Connect the speaker  
cable to the appropriate terminal on the bottom of  
the speaker.  
Be sure to match the speaker cable to the  
appropriate terminal on the components: + to + and  
– to –.  
If the cables are reversed, the sound will be  
distorted and will lack base.  
4. For Front or Rear Speaker : Close the bottom  
cover of the speaker.  
If you use front speakers with low maximum input  
rating, adjust the volume carefully to avoid  
excessive output on the speakers.  
5. For Front or Rear Speaker : Fix the bottom cover  
of the speaker with the 2 screws.  
6. For Front or Rear Speakers : Close the small  
cover.  
Front speaker  
Front speaker  
(Right)  
7. Fix the bracket on the speaker using the 2 screws.  
(Left)  
8. Drive 2 screws in the wall for speaker and then  
hook the speaker over them.  
Rear speaker  
Rear speaker  
(Left surround)  
(Right surround)  
Center speaker  
Subwoofer  
Subwoofer  
11  
 
HDMI Connection  
HDMI compatible TV  
HDMI  
If you have a HDMI TV or monitor, you can connect it  
to this DVD/CD Receiver using a HDMI cable.  
1. Connect the HDMI OUT jack on the DVD/CD  
Receiver to the HDMI jack on a HDMI compatible  
TV or monitor (H).  
H
2. Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
3. In stop mode, select HDMI mode by pressing  
HDMI. Press RESOLUTION repeatedly to select  
the resolution you wish to change.  
L
AUDIO  
R
HDMI OUT  
Notes:  
The arrow on the cable connector body should  
face up for correct alignment with the connector on  
the DVD/CD Receiver.  
Resolution setting  
You can change the resolution for the COMPONENT  
VIDEO OUT by pressing RESOLUTION on the  
Remote Control. Available resolution settings are as  
shown below.  
If HDMI cable is not connected, the HDMI button is  
not operated.  
OUTPUT  
Available Resolution  
NTSC  
CONNECTION  
HDMI  
VIDEO OUT  
1920 x 1080i  
1280 x 720p  
720 x 480p  
If there is noise or lines on the screen, please  
check the HDMI cable.  
Not all HDCP-compatible DVI devices will work  
with this DVD/CD Receiver.  
COMPONENT  
VIDEO OUT  
1920 x 1080i  
1280 x 720p  
720 x 480p  
720 x 480i  
If TV does not support HDCP, snow noise appears  
on the screen, or picture may vibrate or flicker.  
MONITOR OUT  
S-VIDEO  
720 x 480i  
720 x 480i  
Tip :  
When you use HDMI connection, you can change the  
resolution (480p, 720p, 1080i) for the HDMI output by  
pressing RESOLUTION on the remote control.  
Notes:  
About HDMI  
For 720p and 1080i resolution on the component  
video out, only non-copy protected discs can be  
played back. If the disc is copy protected, it will be  
displayed at the 480p(NTSC) resolution.  
HDMI (High Definition Multimedia Interface) supports  
both video and audio on a single digital connection for  
an easy all- digital output to an HDMI or DVI-equipped  
TV.  
Connection to an HDMI TV requires an HDMI cable  
while connection to a DVI-equipped TV requires an  
HDMI to DVI adaptor.  
1080i, 720p, and 480p do not work with the analog  
video connections (MONITOR OUT & S-VIDEO  
OUT).  
If you change the resolution, the display MENU  
(MP3/JPEG/DivX) size is changed.  
HDMI has the capability to support standard,  
enhanced, or high-definition video plus standard to  
multi-channel surround-sound audio, HDMI features  
include uncompressed digital video, a bandwidth of up  
to 5 gigabytes per second, one connector (instead of  
several cables and connectors), and communication  
between the AV source and AV devices such as  
DTVs.  
If your TV does not accept your resolution setting,  
abnormal pictures may appear on the screen.  
Please read TV’s owner’s manual then set the  
resolution that your TV can accept.  
Caution:  
Changing the resolution when the recorder is  
connected with HDMI connector may result in  
malfunctions. To solve the problem, turn off the  
recorder and then turn it on again.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI licensing LLC  
12  
 
LANGUAGE  
Displaying Disc Information  
on-screen  
LANGUAGE  
English  
Original  
Off  
OSD  
You can display various information about the disc  
loaded on-screen.  
Disc Audio  
Disc Subtitle  
Disc Menu  
Original  
1. Press DISPLAY to show various playback  
information.  
The items displayed differ depending on the disc  
type or playing status.  
Move  
Select  
2. You can select an item by pressing v / V and  
OSD  
change or select the setting by pressing b / B.  
Select a language for the Setup menu and on-screen  
display.  
Title (Track) – Current title (or track).  
number/total number of titles (or tracks).  
Chapter – Current chapter number/total number  
of chapters.  
Disc Audio / Subtitle / Menu  
Time – Elapsed playing time.  
Audio – Selected audio language or channel.  
Subtitle – Selected subtitle.  
Angle – Selected angle/total number of angles.  
Sound – Selected sound mode.  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
Original – Refers to the original language in which  
the disc was recorded.  
Other To select another language, press number  
buttons then ENTER to enter the corresponding 4-  
digit number according to the language code list  
on page 25. If you enter the wrong language code,  
press CLEAR.  
Note:  
If no button is pressed for a few seconds, the on-  
screen display disappears.  
Initial Settings  
DISPLAY  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound. You  
can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 13 to 15  
DISPLAY  
16  
:
9
TV Aspect  
Widescreen  
Display Mode  
To display and exit the Menu:  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
Move  
Select  
To go to the next level:  
Press B on the Remote Control.  
TV Aspect  
4:3 – Select when a standard 4:3 TV is connected.  
To go back to the previous level:  
Press b on the Remote Control.  
16:9 – Select when a 16:9 wide TV is connected.  
GENERAL OPERATION  
Display Mode  
1. Press SETUP. The Setup menu appears.  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
Letterbox – Displays a wide picture with bands on  
the upper and lower portions of the screen.  
3. Use v / V to select the second desired option then  
Panscan – Automatically displays the wide picture  
on the entire screen and cuts off the portions that  
do not fit.  
press B to move to the third level.  
4. Use v / V to select the desired setting then press  
ENTER to confirm your selection. Some items  
require additional steps.  
5. Press SETUP or PLAY to exit the Setup menu.  
13  
 
AUDIO  
5.1 Speaker Setup  
Make the following settings for the built-in 5.1 channel  
surround decoder.  
Each DVD disc has a variety of audio output options.  
Set the receiver’s AUDIO options according to the  
type of audio system you use.  
1. Press ENTER and 5.1 Speaker Setup menu  
appears.  
AUDIO  
AUDIO  
5.1 Speaker Setup  
Select  
DRC  
On  
Vocal  
On  
Speaker  
Size  
Front L  
HD AV Sync  
0 ms  
Small  
dB  
m
Volume  
Distance  
Test  
0
0
Off  
Move  
Select  
Select  
Move  
Return  
Enter  
Dynamic Range Control (DRC)  
2. Use b / B to select the desired speaker.  
With the DVD*1 format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation possible, thanks to digital audio  
technology. However, you may wish to compress the  
dynamic range of the audio output (the difference  
between the loudest sounds and the quietest ones).  
Then, you may listen to a movie at a lower volume  
without losing clarity of sound. Set DRC to On for this  
effect.  
3. Adjust options using v / V / b / B buttons.  
4. Press ENTER to confirm your selection. Returns to  
the previous menu.  
Speaker selection  
Select a speaker that you want to adjust. (Front  
speakers (Left), Center Speaker, Front speakers  
(Right), Rear speakers (Right), Rear speakers (Left),  
or SubWoofer)  
*1:Dolby Digital only  
Note:  
Vocal  
Certain speaker settings are prohibited by the Dolby  
Digital licensing agreement.  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
Size  
Since the speaker settings are fixed, you cannot  
change the settings.  
HD AV Sync  
You can adjust delay time between a Audio signal and  
a Video signal in milli-seconeds.  
Volume  
Press b / B to adjust the output level of the selected  
speaker. (-5dB ~ 5dB)  
0 10 20 →... → 300  
Distance  
If you connected speakers to your DVD/CD Receiver,  
setting the Distance lets the speakers know how far  
the sound has to travel to reach your set listening  
point. This allows the sound from each speaker to  
reach the listener at the same time.  
Press b / B to adjust the Distance of the selected  
speaker. (You can’t adjust front / Woofer speakers)  
Test  
Press b / B to test the signals of each speaker. Adjust  
the volume to match the volume of test signals  
memorized in the system.  
Front Left (L) Center Front Right (R) →  
Rear Right (R) Rear Left (L) SubWoofer  
14  
 
Area Code  
LOCK (Parental Control)  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list on  
page 25.  
LOCK  
Rating  
Unlock  
Password  
Area Code  
****  
US  
1. Select “Area Code” on the LOCK menu then  
press B.  
2. Follow step 2 as shown previous paragraph  
(Rating).  
Move  
Select  
3. Select the first character using v / V buttons.  
Rating  
4. Press B and select the second character using  
Blocks playback of rated DVDs based on their  
content. Not all discs are rated.  
v / V buttons.  
5. Press ENTER to confirm your Area code selection.  
1. Select “Rating” on the LOCK menu then  
press B.  
2. To access the LOCK options, you must input the  
password you have created. If you have not yet  
entered password, you are prompted to do so.  
OTHERS  
OTHERS  
Input a password and press ENTER. Enter it again  
and press ENTER to verify. If you make a mistake  
before pressing ENTER, press CLEAR.  
DivX(R) Registration  
Select  
3. Select a rating from 1 to 8 using the v / V buttons.  
Rating 1-8: Rating one (1) has the most  
restrictions and rating eight (8) is the least  
restrictive.  
Select  
Move  
DivX(R) Registration  
Unlock: If you select unlock, parental control is  
not active and the disc plays in full.  
We provide you the DivX® VOD (Video On Demand)  
registration code that allows you to rent and purchase  
videos using the DivX® VOD service. For more  
4. Press ENTER to confirm your rating selection, then  
press SETUP to exit the menu.  
1. Select “DivX(R) Registration” option then press B.  
Password  
2. Press ENTER while “Select” is selected and the  
registration code will appear.  
You can enter or change password.  
1. Select Password on the LOCK menu then press B.  
2. Follow step 2 as shown above (Rating).  
Use the registration code to purchase or rent the  
videos from DivX® VOD service at  
download the video onto a disc for playback on  
this unit.  
To change the password, press ENTER when the  
“Change” option is highlighted. Input a password  
and press ENTER. Press ENTER. Input a new  
password and press ENTER.Enter it again and  
press ENTER to verify.  
3. Press ENTER to exit.  
Note:  
3. Press SETUP to exit the menu.  
All the downloaded videos from DivX® VOD can only  
be played back on this unit.  
If you forget your password  
If you forget your password, you can clear it using the  
following steps:  
1. Press SETUP to display the Setup menu.  
2. Input the 6-digit number “210499” and press  
ENTER. The password is cleared.  
15  
 
Operation  
General features  
Buttons  
Operations  
Discs  
ALL  
Z (OPEN / CLOSE)  
X (PAUSE)  
Opens or closes the disc tray.  
ALL  
During playback, press X to pause playback.  
Press X repeatedly to play Frame-by-Frame.  
DVD  
DivX  
SKIP (. / >)  
During playback, press SKIP (. or >) to go to the  
next chapter/track or to return to the beginning of the  
current chapter/track.  
ALL  
Press SKIP . twice briefly to step back to the previous  
chapter/track.  
SCAN (m / M)  
During playback, press SCAN (m or M) repeatedly to  
select the required scan speed.  
DVD : 5 steps (X2, X4, X8, X16, X100)  
DivX disc : 4 steps (X2, X4, X8, X16)  
DVD  
ACD  
DivX  
MP3  
WMA  
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)  
REPEAT  
A-B  
During playback, press REPEAT repeatedly to select a  
desired repeat mode.  
DVD Video discs: Chapter/Title/Off  
ALL  
Audio CD, DivX/MP3/WMA discs: Track/All/Off  
During playback, each press of A-B button to select point  
A and point B and repeats a sequence from point A  
(Starting point) to point B (End point).  
DVD  
DVD  
Press REPEAT A-B to exit.  
ZOOM  
TITLE  
During playback or pause mode, press ZOOM to enlarge  
the video image (3 steps).  
You can move through the zoomed picture using b B v V  
buttons.  
If the current DVD title has a menu, the title menu  
appears on the screen. Otherwise, the disc menu may  
appears.  
DVD  
DVD MENU  
(SUBTITLE)  
The disc menu appears on the screen.  
DVD  
DVD  
DivX  
DivX  
During playback, press SUBTITLE repeatedly to select a  
desired subtitle language.  
DVD  
DVD  
(AUDIO language) During playback, press AUDIO repeatedly to hear a  
different audio language or audio track.  
Pause mode, press SLOW (m or M) to select the  
required speed.  
SLOW  
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)  
16  
 
DVD  
Notes on general features:  
Last Scene Memory  
If you press SKIP (>) once during Repeat  
Chapter (Track) playback, the repeat playback  
cancels.  
This receiver memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the receiver or  
switch off the receiver. If you load a disc that has the  
scene memorized, the scene is automatically recalled.  
Zoom may not work on some DVDs.  
The A-B repeat function is available only in the  
current track.  
Note:  
This receiver does not memorize the scene of a disc if you  
switch off the receiver before commencing to play the disc.  
Additional features  
Time Search DVD  
DivX  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback.  
2. Press v / V to select the time clock icon and  
“--:--:--” appears.  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
numbers, press CLEAR to remove the numbers  
you entered. Then input the correct numbers.  
4. Press ENTER to confirm. Playback starts from the  
selected time.  
Marker Search DVD  
To enter a Marker  
DivX  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
To Recall or Clear a Marked Scene  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
3. Press ENTER and playback starts from the  
marked scene. Or, Press CLEAR and the marker  
number is erased from the list.  
4. You can play any marker by inputting its number  
on the marker search menu.  
Screen Saver  
The screen saver appears when you leave the unit in  
Stop mode for about five minutes.  
17  
 
Playing an Audio CD or MP3/WMA file Programmed Playback  
This unit can play Audio CDs or MP3/WMA files  
recorded media.  
The program function enables you to store your  
favorite tracks from any disc in the receiver memory. A  
program can contain 300 tracks.  
MP3/ WMA/ Audio CD  
Once you insert an MP3/WMA files recorded media or  
Audio CD, a menu appears on the TV screen.  
Press v / V to select a track/file then press PLAY or  
ENTER and playback starts. You can use variable  
playback functions. Refer to page 16.  
1. Insert a disc.  
Audio CD and MP3/WMA Discs:  
2. Select a track on the “List”, then press PROG. or  
select “  
(Add)” icon then press ENTER to place  
the selected track on the “Program” list. Repeat to  
place additional tracks on the list.  
0:00:00  
1
/
12  
0:00:00  
MP3  
1
/
104  
JPEG  
Audio CD  
List  
Track1  
Track2  
Track3  
Track4  
Track5  
Program  
List  
Program  
Music Folder  
Music Folder  
Music Folder  
Music Folder  
Music Folder  
Music Folder  
Music Folder  
Music Folder  
1
2
3
4
5
6
7
8
Note:  
Track6  
You can add all tracks in the disc. Select “  
then press ENTER.  
Add All)” icon  
(
Track7  
Track8  
3. Select the track you want to start playing on the  
“Program” list. Press MENU to move to the next  
page.  
Tips:  
Press MENU to move to the next page.  
On a CD with MP3/WMA and JPEG you can switch  
MP3/WMA and JPEG. Press TITLE and MUSIC or  
PHOTO word on top of the menu is highlighted.  
4. Press PLAY or ENTER to start. Playback begins in  
the order in which you programmed the tracks.  
Playback stops after all of the tracks on the  
“Program” list have played once.  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 32 - 48 kHz (MP3),  
5. To resume normal playback from programmed  
playback, select a track of AUDIO CD (or  
MP3/WMA) list and then press PLAY.  
within 24 - 48kHz (WMA)  
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)  
• The DVD/CD Receiver cannot read an MP3/WMA file  
that has a file extension other than “.mp3” / “.wma”.  
• CD-R physical format should be ISO 9660  
• If you record MP3 / WMA files using software that  
cannot create a file system (eg. Direct-CD) it is  
impossible to playback MP3 / WMA files.We recommend  
that you use Easy-CD Creator, which creates an ISO  
9660 file system.  
• File names should have a maximum of 8 letters and  
must incorporate an .mp3 or .wma extension.  
• They should not contain special letters such as / ? * : “  
< > l etc.  
Repeat Programmed Tracks  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
2. Press REPEAT to select a desired repeat mode.  
• TRACK: repeats the current track  
• ALL: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
Erasing a Track from “Program” List  
1. Use v V to select the track that you wish to erase  
• The total number of files on the disc should be less than  
999.  
from the Program list.  
2. Press CLEAR. Alternatively, select “  
(Delete)”  
This DVD/CD Receiver requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are many  
different types of recordable disc formats (including CD-R  
containing MP3 or WMA files) and these require certain  
pre-existing conditions (see above) to ensure compatible  
playback.  
icon then press ENTER to place the selected track  
on the Program list. Repeat to erase additional  
tracks on the list.  
Erasing the Complete Program List  
Use v / V to select “  
(Del all)”, then press  
ENTER.  
Customers should note that permission is required in  
order to download MP3 / WMA files and music from  
the Internet. Our company has no right to grant such  
permission. Permission should always be sought from  
the copyright owner.  
Note:  
The programs are also cleared when the disc is removed.  
18  
 
JPEG  
Viewing a JPEG file  
JPEG disc compatibility with this player is  
limited as follows:  
This unit can play discs with JPEG files.  
Before playing JPEG recordings, read the notes on  
JPEG Recordings on right.  
• Depending upon the size and number of JPEG  
files, it could take a long time for the DVD/CD  
Receiver to read the disc’s contents. If you don’t  
see an on-screen display after several minutes,  
some of the files may be too large — reduce the  
resolution of the JPEG files to less than 2M pixels  
as 2760 x 2048 pixels and burn another disc.  
1. Insert a disc and close the tray.  
The PHOTO menu appears on the TV screen.  
PHOTO  
List  
Preview  
JPEG Folder 1  
JPEG Folder 2  
JPEG Folder 3  
JPEG Folder 4  
JPEG Folder 5  
JPEG Folder 6  
JPEG Folder 7  
JPEG Folder 8  
• The total number of files and folders on the disc  
should be less than 999.  
• Some discs may be incompatible due to a  
different recording format or the condition of disc.  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears.  
• If the files have “.jpe” or “.jpeg” extensions,  
please rename them as “.jpg” file.  
If you are in a file list and want to return to the  
previous Folder list, use the v / V buttons on the  
remote to highlight  
and press ENTER.  
• File names without “.jpg” extension will not be  
able to be read by this DVD/CD Receiver. Even  
though the files are shown as JPEG image files in  
Windows Explorer.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER or PLAY. While  
viewing a file, you can press STOP to move to the  
previous menu (JPEG menu).  
Tips:  
There are four Slide Speed options  
:
> (Slow), >> (Normal), >>> (Fast) and II (off).  
Use v /V /b /B to highlight the Speed. Then, use b / B to  
select the option you want to use then press ENTER.  
If you set Speed option to Off, Slide is not active.  
Slide Show  
Use v V b B to highlight the  
(Slide Show) then  
press ENTER.  
Still Picture  
1. Press PAUSE/STEP during slide show.  
The DVD/CD Receiver will now go into PAUSE  
mode.  
2. To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
Moving to another File  
Press SKIP (. or >) once while viewing a  
picture to advance to the next or previous file.  
To rotate picture  
Press b / B during showing a picture to rotate the  
picture clockwise or counter-clockwise.  
19  
 
Playing a DivX Movie file  
Using this DVD/CD Receiver you can play DivX disc.  
DivX disc compatibility with this player is limited  
as follows:  
• Available resolution size of the DivX file is under  
800x600 (W x H) pixel.  
1. Insert a disc and close the tray. The MOVIE menu  
appears on the TV screen.  
• The file name of the DivX subtitle is available by  
45 characters.  
MOVIE  
0:00:00  
List  
• If there is impossible code to express in the DivX  
file, it may be displayed as " _ " mark on the  
display.  
Movie Folder 1  
Movie Folder 2  
Movie Folder 3  
Movie Folder 4  
Movie Folder 5  
Movie Folder 6  
Movie Folder 7  
Movie Folder 8  
• If the number of the screen frame is over 30  
per 1 second, this unit may not operate  
normally.  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears. If you are in a  
file list and want to return to the Folder list, use the  
• If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
v / V buttons on the remote to highlight  
and  
press ENTER.  
Playable DivX file  
".avi ", ".mpg ", ".mpeg ", ".divx"  
3. If you want to view a particular file, press  
v / V to highlight a file and press ENTER or PLAY.  
Playable Subtitle format  
SubRip(*.srt/*.txt)  
SAMI(*.smi)  
4. Press STOP to exit.  
Tips:  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 2.0(*.sub/*.txt)  
VobSub(*.sub)  
Press MENU to move to the next page.  
On a CD with MP3/WMA, JPEG and MOVIE file, you can  
switch MUSIC, PHOTO and MOVIE menu. Press TITLE  
and MUSIC, PHOTO and MOVIE word on top of the menu  
is highlighted.  
Playable Codec format  
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",  
"MP43 ", "3IVX ".  
Notes:  
Be sure to select “SUBTITLE ON” mode by pressing the  
subtitle file every time before playing a DivX file .  
Playable Audio format  
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".  
• Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
• Bit rate: within 32 - 320kbps (MP3),  
40 - 192kbps (WMA)  
When the subtile has more than two languages in the file,  
original subtile is only available.  
The DivX files in your memory card can not be played.  
You can not adjust sound mode and VIRTUAL sound  
during the DivX file playing.  
Notice for displaying the Divx subtitle  
If the subtitle does not display properly during playback,  
press and hold S-TITLE about 3 seconds then press S-  
TITLE to select another language code until the subtitle  
is displayed properly  
20  
 
DVD Audio Discs  
Moving to another GROUP  
Some DVD Audio discs divide content into different  
groups. Your player enables you to quickly access  
different groups during playback via the on-screen  
display.  
DVD Audio is a new disc format building on the  
success of DVD to provide high quality,  
uncompressed, multi-channel audio for a new  
experience in audio quality. A DVD Audio disc can be  
identified by the DVD audio logo on the disc jacket or  
on the disc itself.  
1. Press DISPLAY during playback on in stop mode.  
2. Press 3/4 to select Group icon.  
DVD Audio can provide higher quality stereo than  
Audio CDs with a sampling rate of up to 192kHz  
(compared to 44.1kHz for CDs). DVD Audio digital  
sound can be delivered with up to 24 bits of data  
(compared to 16 bits for a standard CD).  
3. Press 1/2 or the numbered buttons (0-9) to select  
a group number.  
Note:  
Sometimes the author of the disc creates hidden  
content that can only be accessed by entering a  
password. If the lock icon appears on the TV screen,  
enter the password (sometimes you’ll find it on the  
disc’s jacket cover or on a web site). This password  
control isn’t dictated by your DVD/CD Receiver — it is  
a function of the disc.  
A typical DVD Audio disc contains up to seven times  
the data capacity of a CD. This additional space is  
used for music, either Advanced Resolution multi-  
channel sound quality that is closer to the artist’s  
master recording or for longer recordings. Many DVD  
Audio discs contain on-screen text, such as artist  
biographies, playlists, or lyrics. Some DVD Audio  
discs contain photo galleries or video clips.  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
Note:  
To enjoy maximum sound quality and surround effect  
of DVD Audio, you must use 5.1 channel analog audio  
output (5.1CH AUDIO OUT jacks on the DVD/CD  
Receiver).  
Viewing another PAGE  
Since DVD Audio discs can hold a lot of content, there  
are various ways to see what’s available on the disc.  
1. Press DISPLAY during playback.  
2. Press 3/4 to select Page icon.  
3. Press 1/2 to select a page number.  
What appears on the screen will vary from disc to  
disc because the information available depends  
upon the way the disc was created.  
Note:  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
21  
 
Presetting the Radio Stations  
Listening to the Radio  
You can preset 50 stations for FM and AM (MW).  
Before tuning, make sure that you have turned down  
the volume.  
Preset radio stations in the DVD/CD Receiver’s  
memory first (see “Presetting radio stations” on the  
left).  
1. Press BAND on the Remote Control until FM or  
AM (MW) appears in the display window.  
1. Press BAND until FM or AM (MW) appears in the  
display window.  
The last received station is tuned in.  
2. And then every time you press BAND, FM and AM  
(MW) changes alternately.  
2. Press PRESET +/- repeatedly on the Remote  
Control to select the preset station you want.  
Each time you press the button, the DVD/CD Receiver  
tunes in one preset station at a time.  
3. Press and hold TUN.(-/+) for about two seconds  
until the frequency indication starts to change,  
then release.  
Scanning stops when the DVD/CD Receiver tunes in a  
station.  
3. Adjust the volume by rotating VOLUME on the  
front panel or by pressing VOLUME + or - on the  
Remote Control repeatedly.  
4. Press PROG/MEMO on the Remote Control.  
A preset number will flash in the display window.  
To turn off the radio  
Press POWER to turn the DVD/CD Receiver off or  
select another function mode (DVD/CD, AUX, USB).  
5. Press PRESET +/- on the Remote Control to  
select the preset number you want.  
To listen to non-preset radio stations  
Use manual or automatic tuning in step 2.  
6. Press PROG/MEMO on the Remote Control again.  
The station is stored.  
For manual tuning, press TUN.(-/+) repeatedly.  
7. Repeat steps 3 to 6 to store other stations.  
For automatic tuning, press and hold TUN.(-/+) for  
about two seconds on the front panel.  
To tune in a station with a weak signal  
Press TUN.(-/+) repeatedly in step 3 to tune in the  
station manually.  
To select a preset radio station directly  
You can use the number buttons on the Remote  
Control to select a preset radio station directly.  
For example, to listen to preset station 4, press 4 on  
the Remote Control. To listen to preset station 19,  
press 1 then 9 (within 3 seconds).  
To clear all the stored stations  
Press and hold PROG/MEMO for about two seconds  
and “ERASE ALL” is appeared in the display window  
and then press PROG/MEMO again, the stations are  
cleared.  
For your reference  
If an FM program is noisy  
Press MONO/ST. on the front panel so that “ST.”  
disappears in the display window. There will be no  
stereo effect, but the reception will improve. Press  
the button again to restore the stereo effect.  
If you have accidentally entered into the "ERASE  
ALL" mode and you do not wish to clear the  
memory, do not press any key. After a few seconds,  
the "ERASE ALL" display will go off by itself and  
change to normal mode.  
To improve reception  
Reorient the supplied antennas.  
Note:  
If all stations have already been entered, the FULL  
message will appear in the display window for a  
moment and then a preset number will flash.  
To change the preset number, follow the steps 5-6 as  
above.  
22  
 
Sleep Timer Setting  
You can set the DVD/CD Receiver to turn off  
automatically at a specified time.  
XTS/XTS pro  
Each time you press XTS pro the setting changes in  
the following order.  
1. Press SLEEP to set the desired sleep time.  
The SLEEP indicator and sleep time appears in the  
display window.  
XTS ON NORMAL XTS-P ON...  
XTS-P ON  
The unique sound quality of the LG Technology  
creates the optimum sound for you to play the  
perfect playback of the original sound and to feel  
the living sound source.  
2. Each time you press SLEEP the setting  
changes in the following order.  
SLEEP 180 150 12090 80 70 6050 40 →  
30 20 10 OFF  
XTS ON  
When playing the movie with the weak bass sound  
relatively to the general music, it enforces the  
sense of sound at woofer for you to satisfy with.  
In the mode of 2 CH BYPASS, It creates the high  
display effect by playing the sound source via the  
rear speakers same as the front speakers.  
Note:  
You can check the time remaining before the DVD/CD  
Receiver turns off.  
Press SLEEP. The remaining time appears in the  
display window.  
Note:  
Dimmer  
The XTS mode is temporarily disabled when changing  
from 2.1 CH to 5.1 CH and it is enabled when changing it  
to 2.1 CH.  
This function will change the brightness of the display  
window on the front panel during in power-on status.  
Press the DIMMER repeatedly.  
VIRTUAL sound  
press VIRTUAL the setting VIRTUAL sound.  
Mute  
Press MUTE to mute your unit.  
You can mute your unit in order, for example, to  
answer the telephone, “MUTE” indicator flashes in the  
display window.  
Source  
2.1 ch.  
5.1 ch  
Display  
VIRTUAL  
VIRTUAL  
Effect  
3D STEREO  
Multichannel sound  
Using Headphone Jack  
Connect a stereo headphone plug ( 3.5mm) into the  
3D STEREO  
PHONES connector.  
Realtime 3D positioned sound rendering  
technology with stereo sources, optimized for  
stereo speakers. Listeners may experience  
amazing virtual surround effects with their own  
multimedia players.  
The speakers are automatically disconnected when  
you plug in a headphone (not supplied).  
Selecting input source  
You can use VCRs or other units connected to the AV  
IN. Refer to the owner’s manual supplied with the unit  
for further information on the operation.  
Multichannel sound  
The Multichannel sound makes a 5.1 ch feel 10.1  
ch sound therefore this mode provides a emotion  
which you are involved with sound and you can  
feel detailed sound.  
Press AUX repeatedly on the Remote Control to  
select the desired input source.  
Each time you press this button, the mode of the  
function changes in the following sequence:  
Sound Mode  
AV 1/2 : for selecting the analog signal from AV1/2 AUDIO  
You can enjoy surround sound simply by selecting  
one of the pre-programmed sound fields according to  
the program you want to listen to. (2 ch. sound only)  
IN (L/R) & VIDEO IN Connectors.  
Note:  
You can also select the input source by pressing  
FUNC. button on the front panel.  
BYPASS ON STAGE STUDIO CLUB HALL  
THEATER 1 CHURCH PL ll MOVIE  
PL ll MUSIC PL ll MTRX BYPASS...  
Press and hold down this button about 3 seconds,  
then press repeatedly to select input source.  
Note:  
Initial sound mode is BYPASS  
23  
 
Controlling Your TV with the Supplied Remote  
You can control the sound level, input source, and  
power switch of your LG TV with the supplied remote.  
Code numbers of controllable TVs  
If more than one code number is listed, try entering  
them one at a time until you find the one that works  
with your TV.  
You can control your TV using the buttons below.  
Manufacturer  
ADMIRAL  
AIWA  
Code Number  
Manufacturer  
MONTGOMERY  
WARD  
Code Number  
01,06,08,09  
23,24,32,33,34  
01,08  
16,33,37,44,45  
70  
AKAI  
01  
NEC  
AMARK  
09  
NOBLEX  
07  
AOC  
01  
PACKARD BELL  
PANASONIC  
PHILCO  
43  
BELL & HOWELL  
BROKSONIC  
CANDLE  
33  
07,11,13,25,35,36  
01,06,07,08,09,  
15,38,43,58  
06,07,43,61,62,65  
30  
18,19  
51  
CCE  
07  
PHILIPS  
CENTURION  
CINERAL  
CITIZEN  
08  
PIONEER  
PORTLAND  
PROSCAN  
QUASAR  
RADIO SHACK  
RCA  
43  
09  
49,50,51,52,53,54,55  
03,37,44  
11,13  
CORONADO  
CROWN  
09  
09  
16,17,23  
01,03,37,44,69  
16,17,23  
08  
CURTIS MATHES  
DAEWOO  
DAYTRON  
EMERSON  
FISHER  
01,03,08,33,35,37,44  
16,38,39,40,41,42,43  
01,08  
REALISTIC  
SAMPO  
TV Control  
Buttons  
01,09,16,17,18,19  
28,29  
SAMSUNG  
SANYO  
01,08,09,25,68  
28,29  
FUNAI  
46,47  
SCOTT  
01,08  
GENERAL ELECTRIC 03,10,11,13,37,44  
SEARS  
09,25,26,27,28,29  
64  
GRADIENTE  
HITACHI  
JC PENNEY  
JVC  
01,56,57,63,67  
09,14,15,43  
01,08,10,27,35  
20,21,63,67  
43  
SEMP  
SHARP  
09,22,23,24,60,66  
01,06,08,09,10,  
23,24,33,34  
12,62  
SIGNATURE 2000  
KIOTE  
SONY  
KMC  
09  
SOUNDESIGN  
SYLVANIA  
51  
KTV  
01,08,09,31  
01,07,08,09,35,39,40  
33  
01,04,05,06,07,  
08,35,51  
46,47  
By pressing  
You can  
LG (GOLDSTAR)  
LODGENET  
LOGIK  
POWER  
Turn the TV on or off.  
SYMPHONIC  
TATUNG  
TEKNIKA  
TELERENT  
THOMSON  
YORX  
33  
11  
CHANNEL(v / V) Scans up or down through  
LXI  
09,24,25,26,27,28,29  
01,02,04,05,06,  
07,08,09,20,  
34,35,43,51,61,62,65  
33  
07,09,16,33,51  
09,33  
memorized channels.  
MAGNAVOX  
69  
VOLUME +/–  
TV INPUT  
Adjust the volume of the TV.  
08  
MAJESTIC  
TOSHIBA  
WARDS  
01,25,26,27,64  
01,06,08,09,10,33,34  
48  
Switch the TV’s input source  
between the TV and other input  
sources.  
MARANTZ  
01,32  
MEMOREX  
33  
XR1000  
MGA/MITSUBISHI  
01,08,32,34  
ZENITH  
01, 02,33,59  
MUTE  
Turns on or off TV sound.  
Notes:  
Note:  
Depending on your TV, some or all buttons may  
not function on the TV, even after entering the  
correct manufacturer code.  
Depending on the unit being connected, you may not  
be able to control your TV using some of the buttons.  
If you enter a new code number, the code number  
Controlling other TVs with the remote  
previously entered will be erased.  
When you replace the batteries of the remote, the  
code number you have set may be reset to the  
default setting. Set the appropriate code number  
again.  
You can control the sound level, input source, and  
power switch of non-LG TVs as well. If your TV is  
listed in the table below, set the appropriate  
manufacturer code.  
1. While holding down TV POWER button, press the  
number buttons to select the manufacturer code  
for your TV (Refer to table on the right column).  
2. Release TV POWER button.  
24  
 
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Sindhi  
Area Codes  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
FI  
FR  
DE  
GB  
GR  
GL  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
NL  
Heard and McDonald Islands HM  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
HK  
HU  
IN  
ID  
IL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
IT  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
JM  
JP  
KE  
KW  
LY  
LU  
PT  
RO  
El Salvador  
Zimbabwe  
25  
 
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Correction  
Cause  
Symptom  
No power.  
• Plug the power cord securely into the  
wall outlet.  
• The power cord is disconnected.  
• Insert a disc. (Check that the DVD or,  
audio CD indicator in the DVD display  
is lit.)  
• No disc is inserted.  
The power is on, but  
the DVD/CD Receiver  
does not work.  
• Select the appropriate video input  
mode on the TV so the picture from  
the DVD/CD Receiver appears on the  
TV screen.  
• The TV is not set to receive DVD signal  
output.  
No picture.  
• Connect the video cable into the  
jacks securely.  
• The video cable is not connected  
securely.  
• Turn on the TV.  
• The connected TV power is turned off.  
There is no sound or  
only a very low-level  
sound is heard.  
• Select the correct input mode of the  
audio receiver so you can hear the  
sound from the DVD/CD Receiver.  
• The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
• Connect the audio cable into the  
jacks securely.  
• The audio cables are not connected  
securely.  
• Turn on the equipment connected  
with the audio cable.  
• The power of the equipment connected  
with the audio cable is turned off.  
• Replace it with new one.  
• Clean the disc.  
• The audio connecting cable is damaged.  
• The disc is dirty.  
The playback picture is  
poor.  
• Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display  
is lit.)  
The DVD/CD Receiver • No disc is inserted.  
does not start playback.  
• Insert a playable disc. (Check the  
disc type, colour system and Regional  
code.)  
• An unplayable disc is inserted.  
• Place the disc with the playback side  
down.  
• The disc is placed upside down.  
• Place the disc on the disc tray  
correctly inside the guide.  
• The disc is not placed within the guide.  
• Clean the disc.  
• The disc is dirty.  
• Press the SETUP button to turn off  
the menu screen.  
• A menu is on the TV screen.  
• Cancel the Rating function or change  
the rating level.  
• The Rating level is set.  
• Clean the disc.  
Loud hum or noise is  
heard.  
• The disc is dirty.  
• Connect the speakers and  
components securely.  
• The speakers and components are  
connected poorly.  
• Move your TV away from the audio  
components.  
• The DVD/CD Receiver is located too  
close to the TV.  
26  
 
Cause  
Correction  
Symptom  
• The antenna is positioned or connected  
poorly.  
• Connect the antenna securely.  
Radio stations cannot  
be tuned in.  
• Adjust the antennas and connect an  
external antenna if necessary.  
• The signal strength of the stations is too  
weak (when tuning in with automatic  
tuning).  
• Tune in the station manually.  
• No stations have been preset or preset  
stations have been cleared (when  
tuning by scanning preset stations).  
• Preset the stations (page 22).  
• The Remote Control is not pointed at the • Point the Remote Control at the remote  
The Remote Control  
does not work  
properly.  
remote sensor of the DVD/CD Receiver.  
sensor of the DVD/CD Receiver.  
• The Remote Control is too far from the  
DVD/CD Receiver.  
• Use the Remote Control within about 23  
ft (7 m).  
• There is an obstacle in the path of the  
Remote Control and the DVD/CD  
Receiver.  
• Remove the obstacle.  
• The batteries in the Remote Control are  
flat.  
• Replace the batteries with new ones.  
• Press DIMMER on the Remote Control.  
• Nothing is displayed on the front panel  
display.  
The front panel  
display is too dim.  
27  
 
Specifications  
Power supply  
Power consumption  
Net Weight  
Refer to main label  
Refer to main label  
3.9 kg  
External dimensions (W x H x D) 430 x 57 x 295 mm  
Operating conditions  
Operating humidity  
Laser  
Temperature: 5°C to 35°C, Operation status: Horizontal  
5% to 85%  
Semiconductor laser, wavelength 650 nm  
NTSC 525/60  
Signal system  
Frequency response (audio)  
Signal-to-noise ratio (audio)  
Dynamic range (audio)  
Harmonic distortion (audio)  
Video input  
150 Hz to 18 kHz  
More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)  
More than 70 dB  
0.5 % (1 kHz, at 1W position) (20 kHz LPF)  
1.0 V (p-p), 75 , negative sync., RCA jack x 2  
1.0 V (p-p), 75 , negative sync., RCA jack  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin x 1  
(C) 0.3 V (p-p), 75 Ω  
Video output  
S-video output  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1  
87.5 - 108.0 MHz  
Tuning Range  
Intermediate Frequency  
Signal-to Noise Ratio  
Frequency Response  
Tuning Range  
10.7 MHz  
60 dB (Mono)  
140 - 8,000 Hz  
520 - 1,720 kHz  
Intermediate Frequency  
Stereo mode  
Surround mode  
450 kHz  
100W + 100W (Rated Output Power 100W, 6at 1 kHz, THD 10 %)  
Front: 100W + 100W (Rated Output Power 100W, THD 10 %)  
Centre*: 100W  
Surround*: 100W + 100W (Rated Output Power 100W, 6at 1 kHz, THD 10 %)  
Subwoofer*: 200W (Rated Output Power 150W, 3at 30 Hz, THD 10 %)  
AV IN  
(* Depending on the sound mode  
settings and the source, there  
may be no sound output.)  
Inputs  
Outputs  
S-VIDEO, MONITOR, PHONES: (32 , 1.0 V)  
Satellite Speaker  
(LHS-76TFS)  
2 Way 5 Speaker  
6 Ω  
Centre speaker  
(LHS-76TFC)  
2 Way 5 Speaker  
6 Ω  
Subwoofer  
(LHS-76TFW)  
1 Way 1 Speaker  
3 Ω  
Type  
Impedance  
Frequency Response  
Sound Pressure Level  
Rated Input Power  
Max. Input Power  
Net Dimensions (W x H x D)  
Net Weight  
180 - 20,000 Hz  
83 dB/W (1m)  
100 W  
180 - 20,000 Hz  
83 dB/W (1m)  
100 W  
50 - 1,500 Hz  
82 dB/W (1m)  
200 W  
200 W  
200 W  
400 W  
280 x 1298 x 280 mm  
5.2kg  
500 x 170 x 70 mm  
1.8kg  
235 x 400 x 365 mm  
9.8kg  
Designs and specifications are subject to change without notice.  
 
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or  
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date  
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original  
purchaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
Call 1-800-243-0000 for instructions on getting the  
defective unit repaired or replaced.  
PARTS: One Year from the Date of Purchase.  
Please retain dated sales receipt and your box to  
return the unit to LG for repair or replacement.  
* Parts replaced are warranted for the remaining portion  
of the original warranty period.  
Shipping both ways will be paid by LG during the first 90  
days of the Warranty Period. During the remainder of the  
Warranty Period (91-365days), you pay inbound shipping  
charges and LG pays return shipping charges.  
Visit our website at: http://www.lgservice.com  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED  
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG  
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE  
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE  
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or  
consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to  
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,  
maintenance or failure to maintain, or separate system components; and  
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside  
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,  
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or  
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer  
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For nearest Authorized Service Center, Where to buy,  
Product Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year)  
and select appropriate options from the menu.  
Or visit our website at http://www.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
P/N : 3834RT0017C  
Issue O  
ENGLEWOOD CLIFFS, NJ  
Printed in China  
 

KWC Indoor Furnishings S10J101 User Manual
KWC Indoor Furnishings Z535390000 User Manual
Learning Resources High Chair LPK0183 GUD User Manual
Life Fitness Bicycle 95RWEZ User Manual
Linksys Network Router WRT54GX4 User Manual
Makita Planer 2012NB User Manual
Marantz Stereo System SR5400 User Manual
Massey Ferguson Lamp;G Tiller MF 3650 PTO User Manual
Maxtor Computer Drive C01W010 User Manual
Meyer Spreader 8720 User Manual